Hardware Options Installation
IMPORTANT: To install the rails on the drive cage, always use the screws that ship with
the two-bay hot-plug SCSI drive cage option kit.
IMPORTANT: Install the right-hand rail on the left side of the drive cage, and the
left-hand rail on the right side of the drive cage.
7. Install the rails:
a. Position the rails and two guide screws in the lower mounting holes on each
side of the drive cage.
b. Tighten the screws.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide 4-25
HP CONFIDENTIAL
Writer: Rob Weaver File Name: e-ch4 Hardware Options Installation.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:24 PM
To Next Page
Loading...
