HP MP9 G4 User Manual

3. Tilt the fan up using the front tab and leave it in the up position.
NOTE: It is not necessary to fully remove the fan to remove or install a memory module.
4. Locate the memory module locations (1) and (2) on the system board.
5. To remove a memory module, press outward on the two latches on each side of the memory module (1),
and then pull the memory module (2) out of the slot.
The computer automatically recognizes the new memory when you turn on the computer.
Memory modules 29

HP MP9 G4 Specifications

General

Brand	HP
Model	MP9 G4
Category	Desktop
Language	English