Changing from desktop to tower conīguration
The computer can be used in a tower orientation with an optional tower stand that can be purchased from HP.
1. Prepare the computer for disassembly (Preparation for disassembly on page 14).
2. Orient the computer so that its right side is facing up and place the computer in the optional stand.
NOTE: To stabilize the computer in a tower orientation, HP recommends the use of the optional tower
stand.
3. Reconnect the AC power cord and any external devices, then turn on the computer.
NOTE: Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains clear
and free of obstructions.
4. Lock any security devices that were disengaged when the top cover was removed.
40 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
Need help?
General