c. From the Select Users dialog box (Figure 7-6), select the iLO 2 object created in step 2:
(lpmp in folder mpiso.com/MPs). Click OK.
Figure 7-6 Select Users Dialog Box
d. To save the list, click Apply.
e. To add users to the role, click the Members tab and use the Add button and the Select
Users dialog box. Devices and users are now associated.
6. To set the rights for the role, use the Lights Out Management tab (Figure 7-7). All users
and groups within a role have rights assigned to the role on all of the iLO 2 devices managed
by the role. In this example, the users in the remoteAdmins role are given full access to the
iLO 2 functionality. Select the appropriate rights and click Apply.
Figure 7-7 Lights-Out Management Tab
7. Click OK.
8. Using the same procedure in step 4, edit the properties of the remoteMonitors role, add the
lpmp device to the Managed Devices list on the HP Devices tab, and use the Members tab
to add users to the remoteMonitors role.
9. On the Lights Out Management tab, click the Login checkbox.
Directory Services for Active Directory 157
To Next Page
Loading...
Need help?
General