HP ntegrity iLO 2 MP

cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
Target: map1/swinventory1
SoftwareInventory is a dedicated collection for all firmware in the system known to the iLO 2
MP.
Table 6-37 shows swinventory1 target properties.
Table 6-37 swinventory1 Properties
Access and ValuesDescriptionProperty Name
Read-only
The value is set to firmware inventory.
Provides a textual description of the object.Description
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
Target: map1/swinventory1/swid#
SoftwareIdentity represents software in the system known to the iLO 2 MP (map1).
Table 6-38 shows swid# target properties.
Table 6-38 swid# Properties
Access and ValuesDescriptionProperty Name
Read-only
Identifies what type of firmware this swid target represents
TargetType
Read-onlyRepresents firmware revision string; for example, F.01.40.VersionString
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
load Moves an image to the iLO 2 MP.
The following is a possible list of swid’s in the system:
• /map1/swinventory1/swid1: represents iLO 2 MP firmware
• /map1/swinventory1/swid2: represents BMC firmware
• /map1/swinventory1/swid3: represents EFI firmware
• /map1/swinventory1/swid4: represents System Firmware
• /map1/swinventory1/swid5: represents PDH firmware
• /map1/swinventory1/swid6: represents UCIO firmware
• /map1/swinventory1/swid7: represents PRS firmware
Displaying Firmware Revisions
This example displays only the iLO 2 MP firmware revision:
</map1/swinventory1> hpiLO-> show -d properties= `
(TargetType=="MP FW",versionstring)
status=0
status_tag=COMMAND COMPLETED
/map1/swid1
SMASH Server Management Command Line Protocol 135