HP ntegrity iLO 2 MP User Manual

Figure 6-27 Standard Page
NOTE: The BL c-Class tab is available only on HP Integrity server blades.
Table 6-25 lists the fields, buttons, and descriptions.
Table 6-25 Standard Page Description
DescriptionFields and Buttons
The 12 digit (hexadecimal) MAC address.MAC Address
Enable or Disable.DHCP Status
The host name set here is displayed at the iLO 2 MP Command interface prompt.iLO 2 MP Host Name
The iLO 2 MP IP address. If DHCP is being used, the IP address is automatically
supplied.
IP Address
The subnet mask for the iLO 2 MP IP network. If DHCP is being used, the subnet mask
is automatically supplied.
Subnet Mask
The IP address of the network gateway. If DHCP is being used, the gateway IP address
is automatically supplied.
Gateway Address
Auto Negotiate or 10 BaseT option.Link State
Submits the information.Submit
Cancels the action.Cancel
Domain Name Server
The Domain Name Server (DNS) page (Figure 6-28) enables you to configure the DNS server
settings, domain name, and up to three DNS servers manually or automatically through DHCP.
It further enables a DDNS update through the primary DNS server as long as it is authoritative
for the zone. You must have iLO configuration access right to use this feature.
118 Using iLO 2 MP

HP ntegrity iLO 2 MP Specifications

General

Brand	HP
Model	ntegrity iLO 2 MP
Category	Server
Language	English