HP ntegrity iLO 2 MP User Manual

| -nc ]
-?
See also: LOGIN, US
LDAP: LDAP group administration
LDAP enters one or more directory groups by specifying the distinguished name of the group
and privileges to be granted to users who are members of that group.
You must configure group administration information when the directory is enabled with the
default schema.
The group administration section of the LDAP command enables users to enter one or more
directory groups by specifying the distinguished name of the group and privileges to be granted
to users who are members of that group.
When a user attempts to log in to the iLO 2 MP, the iLO 2 MP reads that user’s directory name
in the directory to determine which groups the user is a member of. The iLO 2 MP compares this
information with a list of configured groups. The rights of all the matched groups are combined
and assigned to that user.
LDAP: LDAP Lite
LDAP Lite enables you to use directory authentication for logging in to the iLO 2 MP without
having to do any schema extension on the directory server or snap-in installation on the client.
For information on LDAP Lite, see “Configuring LDAP Lite Default Schema” (page 56).
LM: License management
Command access level: MP configuration access
LM displays your current license status. Use it to enter a license key to enable the Advanced Pack
license features.
Command line usage and scripting:
LM [ -key <license key> ] [ -nc ]
-?
LOC: Locator UID LED configuration
Command access level: MP configuration access
LOC displays the current status of the locator UID LED and enables you to turn the locator UID
LED on or off.
In HP Integrity server blades, this command also enables you to turn the enclosure locator UID
LED on or off. The UID LED physically identifies the blade in a data center environment. It emits
a blue light when turned on. It does not have an associated button. You can control the UID LED
from the BMC only.
Command line usage and scripting:
LOC [ -on | -off [ -nc ] ]
-?
Server blade usage
LOC [ -server <on | off> ] [-enclosure <on | -off>] [ -nc ]
-?
LS: LAN status
Command access level: Login access
LS displays all parameters and the current status of the iLO 2 MP LAN connections. The LAN
parameters are not modified by this command.
74 Using iLO 2 MP

HP ntegrity iLO 2 MP Specifications

General

Brand	HP
Model	ntegrity iLO 2 MP
Category	Server
Language	English