<COMMAND> : Enter the command name for help on individual command
TOPics : Show all MP Help topics and commands
HElp : Display this screen
Q : Quit help
====
MP:HE
To display the Main Menu Command List, enter LI at the MP HE: prompt.
To return to the MP Main Menu, enter Q.
To access help from the web GUI, click Help. You can also click the ? at the top right corner of
each page to display help about that page.
Accessing the Host Console Using vKVM (Integrated Remote Console)
For information on how to access the host console using the vKVM feature through the Integrated
Remote Console (IRC), see “Accessing the IRC” (page 90).
Accessing the Host Console Using SMASH SM CLP
For information on how to access the host console using the SMASH SM CLP, see “Accessing
the SM CLP Interface” (page 124).
Accessing iLO 2 MP Using Onboard Administrator
NOTE: The HP BladeSystem Onboard Administrator is only available on HP Integrity server
blades.
To access the iLO 2 MP using Onboard Administrator, follow these steps:
1. Establish a network connection through the OA/iLO network port.
2. Enter the iLO MP IP address you obtained previously through the OA/iLO port in the
appropriate screen. You now have access to the iLO 2 MP functionality through a telnet
session.
3. Ensure that you have an MP prompt.
4. To log into the iLO 2 MP, enter the following default values for the login ID and password
(case sensitive):
• Login: Admin
• Password: Admin
The MP Main Menu screen appears.
Accessing the Graphic Console Using VGA
NOTE: You cannot access the iLO 2 MP using VGA.
Accessing the graphics console using VGA requires three items:
• Monitor (VGA connector)
• Keyboard (USB connector)
• Mouse (USB connector)
The graphic console output displays on the monitor screen.
Accessing the Host Console Using vKVM (Integrated Remote Console) 51
To Next Page
Loading...
Need help?
General