Figure 7-3 Schema Results Screen
Management Snap-In Installer
The management snap-in installer installs the snap-ins required to manage the iLO 2 MP objects
in a Microsoft Active Directory Users and Computers directory or in a Novell ConsoleOne
directory.
To create an iLO 2 MP directory using iLO 2 MP snap-ins, perform the following tasks:
1. Create and manage the iLO 2 MP objects and role objects.
2. Make the associations between iLO 2 MP objects and role objects.
Directory Services for Active Directory
HP provides a utility to automate much of the directory setup process. You can download the
HP Directories Support for the iLO 2 MP on the HP website at:
http://h18004.www1.hp.com/support/files/lights-out/us/index.html
The following sections provide installation prerequisites, preparation, and a working example
of directory services for Active Directory.
Active Directory Installation Prerequisites
The following are prerequisites for installing Active Directory:
• The Active Directory must have a digital certificate installed to enable the iLO 2 MP to
connect securely over the network.
• The Active Directory must have the schema extended to describe the iLO 2 MP object classes
and properties.
• The MP firmware must be Version F.01.57 or later.
• The iLO 2 MP advanced features must be licensed.
Directory services for the iLO 2 MP uses LDAP over SSL to communicate with the directory
servers. Before installing snap-ins and schema for Active Directory, read and have available the
following documentation:
152 Installing and Configuring Directory Services
To Next Page
Loading...
Need help?
General