Using iLO 2 MP Virtual Media Devices
Connect client-based vMedia to a host HP Integrity server through a graphical interface using
a signed Java applet. Refusing to accept the applet certificate prevents browser-based vMedia
from functioning (a red X appears). It also prevents the remote console applet from functioning
because it is also signed using the same certificate.
The vMedia functionality is part of the iLO 2 MP Advanced Pack feature set and is enabled by
purchasing the optional iLO 2 MP Advanced Pack license and granting the vMedia right. If not
licensed, the message “iLO 2 feature not licensed” appears. For more information, see
“Advanced Pack License” (page 23).
NOTE: You can use the vMedia applet only on x86 clients.
To access the iLO 2 MP vMedia devices using the graphical interface, follow these steps:
1. From the Virtual Devices tab, select Virtual Media. The Virtual Media page appears
(Figure 6-11)
Figure 6-11 Virtual Media Page
2. Click Launch to load the vMedia applet. The vMedia applet loads in support of the vMedia
device.
3. At this point, you can connect to a virtual CD/DVD or virtual floppy/USB key device or
create an iLO 2 MP disk image file.
96 Using iLO 2 MP
To Next Page
Loading...
