HP Omnibook 500 Product Information 1-9
Using Fn Hot Keys
The combination of the Fn key plus another key creates a
hot key
—a shortcut key sequence—for
various system controls. To use a hot key, press
and hold
Fn, press the appropriate second key, then
release both keys.
External PS/2 keyboards support only Fn+F5, Fn+F7, and Fn+F12. To use these, press and hold left
CTRL+left ALT, press the appropriate second key, then release both keys.
External USB keyboards do not support Fn hot keys.
Table 1-6. Fn Hot Keys
Hot Key Effect
Fn+F1 Decreases the display brightness.
Fn+F2 Increases the display brightness.
Fn+F5 Toggles among the built-in display, an external display, and simultaneous display on
both.
Fn+F7 Audio mute.
Fn+F8 Toggles the built-in keypad on and off. Does not affect an external keyboard. If Num
Lock is on, then the numeric functions are active; otherwise, cursor control is active (as
marked on an external keyboard).
Fn+F9 Toggles Num Lock on and off.
Fn+F10 Toggles Scroll Lock on and off.
Fn+F11 Pause.
Fn+F12 Enters Hibernate mode.
Fn+HOME Prints screen.
Fn+UP ARROW* Increases sound volume.
Fn+DOWN ARROW* Decreases sound volume.
* Only if marked on the ARROW keys.
To Next Page
Loading...
Need help?
General