HP OmniBook 500

1-12 Product Information HP Omnibook 500
Undocking the Computer
1. Press the undock switch. (You can use the undock switch when the computer is on, off, or in
Standby or Hibernate mode.)
–or–
Click Start, Eject PC.
Figure 1-8. Undocking the Computer
You may need to wait 10 seconds or more for the computer to undock—the computer may not
respond while it is updating its configuration.
2. If the computer will not undock using the undock switch or Start menu, use the emergency
undock latch: slide the button down, then move the entire latch forward.
Figure 1-9. Manually Undocking the Computer