HP OmniBook 900

HP OmniBook 900 Removal and Replacement 2-21
10. Lift the front of the motherboard about 7 cm (3 inches), then slide the motherboard forward until
it comes out of the bottom case.
Figure 2-11. Removing the Motherboard
PCMCIA socket
Motherboard
Speaker cable
Speaker
Bottom case
CPU support
(OB 900B only)
Infrared lens
Fan cable
Fan
Hard drive door
Screw, M2.5×8mm
Right hinge support
Screw, M2.5×4mm
Screw, M2.5×4mm
Mylar insulator
Standoff, M2