9. Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter.
10.
Remove the display inverter.
Reverse this procedure to install the display inverter.
Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket.
Description Spare part number
For use in computer models with Intel processors:
250-GB, 5400-rpm 453949-001
160-GB, 5400-rpm 452060-001
120-GB, 5400-rpm 452059-001
80-GB, 5400-rpm 452058-001
For use in computer models with AMD processors:
250-GB, 5400-rpm 455827-001
160-GB, 5400-rpm 453418-001
120-GB, 5400-rpm 453417-001
80-GB, 5400-rpm 453416-001
Hard drive hardware kit (contains screws, hard drive bracket, and connector) 453419-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
52 Chapter 4 Removal and replacement procedures