HP ProCurve 2650

2-22
Installing the Switch 2650
Sample Network Topologies
Installing the Switch 2650
Stacking the Switch
Switch 2650 units can be connected together, through standard network
connections, and managed through a single IP address. Up to 16 switches can
be connected together in such a “virtual stack”.
You identify the switch as the “Commander” and give that switch an IP address.
Up to 15 other switches in the network can then easily be configured as
Members of the stack and managed through the Commander’s IP address. The
management includes Telnet access and web browser interface access to the
Commander and to each Member switch through the Commander.
For more information on stacking your Switch 2650, please see the Manage-
ment and Configuration Guide, which is on the Documentation CD-ROM that
came with your switch.