Drives
Description Spare part number
Optical drives
DVD±RW drive 657958-001
DVD-ROM drive 608394-001
Blu-ray BD-RW SuperMulti XL Drive 719157-001
Hard drives
2 TB, 7200 rpm hard drive, 3.5 inch 747993-001
1 TB hard drive, hybrid SSD 724937-001
1 TB, 7200 rpm hard drive, 3.5 inch 747992-001
500 GB, 7200 rpm hard drive, 3.5 inch 751283-001
500 GB hard drive, hybrid SSD 724938-001
256 GB Solid State Drive (SSD), self-encrypting (SED) 680020-001
180 GB Solid State Drive (SSD) 754076-001
128 GB Solid State Drive (SSD) 665961-001
120 GB Solid State Drive (SSD) 756459-001
20 GB Solid State Drive (SSD) 683305-001
Card reader
14-in-1, USB 3.0, 3.5-inch, UHS-I 716390-001
15-in-1, USB 3.0, 3.5-inch, UHS-II 736299-001
Adapter, USB 3.0 to 2.0 736835-001
When installing drives, follow these guidelines:
●
The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA
connector on the system board labeled SATA0.
●
Connect a secondary hard drive to the light blue SATA connector on the system board labeled
SATA1.
●
Connect an optical drive to the white SATA connector on the system board labeled SATA5.
●
Connect a media card reader USB 3.0 cable with a USB 3.0 to USB 2.0 adapter to the USB 2.0
connector on the system board labeled MEDIA.
●
The power cable for the drives has two branches coming off the system board connector. The first
branch is a dual-headed cable with the first connector (four-wire) routed to the 3.5-inch optional
drive bay and the second connector (two-wire) routed to the slim optical drive bay. The second
Drives
105
To Next Page
Loading...
