DisplayPort connector module (480 MT and 490 MT
models only)
Description Spare part number
DisplayPort connector module (for use only in 490 MT models) 735966-001
1. Prepare the computer for disassembly (Preparation for disassembly on page 42).
2. Remove the access panel (
Access panel on page 43).
3. Remove the front bezel (
Front bezel on page 44).
4. From the outside, rear of the computer, remove the Torx T15 screw that secures the DisplayPort
module to the computer.
74 Chapter 5 Removal and replacement procedures: Microtower
To Next Page
Loading...
