Installing a 3.5-inch drive
1. Prepare the computer for disassembly (Preparation for disassembly on page 42)
2. Remove the access panel (
Access panel on page 43)
3. You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket
similar to the example shown below.
●
Slide the drive into the bay adapter bracket, ensuring the connector on the drive is fully
inserted into the connector on the adapter bracket.
●
Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket
screws through the sides of the bracket into the drive.
Drives
71
To Next Page
Loading...
