Configuring the Switch Modules using the Menu-driven Interface
2. Press the Enter key. The Setup User Accounts screen is displayed.
3. Using the spacebar, toggle the Action field to Add.
4. Type the user’s name in the Username field.
5. Type an initial password for the user in the New Password field.
IMPORTANT: Passwords used to access the switch module are case-sensitive.
6. Type the new password a second time in the Confirm New Password field.
7. Using the spacebar, toggle the Access Level field to select the user’s access privilege.
8. Highlight APPLY.
9. Press the Enter key to make the user addition effective. A listing of all current user
accounts and access levels is displayed.
IMPORTANT: APPLY makes changes to the switch configuration for the current session only.
You must enter all permanent changes, including user additions or updates, into non-volatile RAM
(NVRAM) using the Save Changes option on the main menu. Refer to the “Saving Changes”
section for more information.
10. Press the Esc key to return to the main menu. Use the Save Changes option to save the
changes into non-volatile RAM.
2-4 HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference Guide
HP CONFIDENTIAL Codename: DeLorean Part Number: 322858-001 Last Saved On: 2/4/03 11:56 AM
To Next Page
Loading...
Need help?
General