1
Overview
Introduction
The ProLiant BL e-Class C-GbE Interconnect Switch provides two console management
interfaces and a Web-based management interface. The command line interface (CLI) and
menu-driven interface allow you to set up and control the switch modules using either the
serial or Ethernet ports on the switch. This guide discusses how to use the menu-driven
interface to set up and manage the interconnect switch.
The menu-driven interface can be accessed either with an ordinary terminal (or terminal
emulator) or over the network using the TCP/IP Telnet protocol. You can use the
menu-driven interface to perform basic network management functions and to configure the
switch modules for management using an Simple Network Management Protocol
(SNMP)-based network management system.
Additional References
Additional information about installling and configuring the interconnect switch is available
in the following guides, which are located on the ProLiant BL e-Class C-GbE Interconnect
Switch Management System Utilities and User Documentation CD.
•
•
•
HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference
Guide
HP ProLiant BL e-Class C-GbE Interconnect Switch Web-based Interface Reference
Guide
HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference Guide 1-1
HP CONFIDENTIAL Codename: DeLorean Part Number: 322858-001 Last Saved On: 2/4/03 11:53 AM
To Next Page
Loading...
