Configuring the Switch Modules using the Menu-driven Interface
2. Press the Enter key. The following screen is displayed.
The Bandwidth Configuration menu allows you to access screens that set and display the
ingress bandwidth and egress bandwidth of specified ports on the switch module.
Configuring Restart Port Ingress Bandwidth
To configure restart port ingress bandwidth:
1. Highlight Configure Restart Port Ingress Bandwidth on the Bandwidth
Configuration menu.
2. Press Enter. The following screen is displayed.
3. Toggle the Action field to Add/Modify.
HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference Guide 2-15
HP CONFIDENTIAL Codename: DeLorean Part Number: 322858-001 Last Saved On: 2/4/03 11:56 AM
To Next Page
Loading...
Need help?
General