Removal and replacement procedures 33
o
Extend the server from the rack (on page 27).
o Remove the server from the rack (on page 28).
4. Remove the access panel ("Access panel" on page 29).
5. Remove the processor air baffle ("Processor air baffle" on page 30).
6. Remove the PCI riser cage ("PCI riser cage" on page 45).
7. Remove the fan cables, front IO (Input/Output) cables, FBWC cable, power supply cables, and
Mini-SAS cables.
8. Remove the system board tray:
a. Loosen the two thumbscrews.
b. Lift the tray out of the chassis.
9. Remove the power supply module ("Power supply module" on page 30).
10. Remove the common slot power supply cage.
To Next Page
Loading...
