Removal and replacement procedures 60
7.
Remove the PCI riser cage ("PCI riser cage" on page 45).
8. Disconnect all fan cables from the system board and then remove all fans.
9. Disconnect all cables connected to the system board ("System board components" on page 74). For
more information, see "Cabling (on page 81)."
10. Remove the FlexibleLOM ("FlexibleLOM option" on page 44).
11. Remove all DIMMs ("DIMMs" on page 52).
12. Remove the heatsink ("Heatsink" on page 53).
13. Open each of the processor locking levers in the order indicated, and then open the processor retaining
bracket.
14. Remove the processor from the processor retaining bracket.
CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
To Next Page
Loading...
