Hardware options installation 44
— Two-bay LFF drive model (uses the HP 250 W Integrated Power Supply or HP 300 W Integrated
Power Supply)
— Four-bay SFF drive model (uses the HP 750 W CS -48 V DC Power Supply)
8. Install the access panel (on page 17).
9. Do one of the following:
o Slide the server into the rack.
o Install the server into the rack ("Installing the server into the rack" on page 26).
10. Connect the peripheral devices to the server.
11. Connect the power cord to the server.
12. Connect the power cord to the power source.
13. Power up the server (on page 14).
To Next Page
Loading...
