HP ProLiant DL360e - RBSU Menu-Driven Interface for G6 and Earlier Servers; RBSU Main Menu (G6 and earlier)

3 RBSU menu-driven interface (G6 and earlier servers)
RBSU main menu
NOTE: Menu options may differ from those in this document, depending on the server model.
On the left-hand side of the screen, the RBSU menu lists configuration settings to view or modify.
On the right-hand side of the screen, a window displays basic server information, including the
server model, serial number, BIOS version, backup BIOS version, memory installed, and processors
installed.
NOTE: To see online help, highlight the selection and press F1. All menus are in English only.
Each RBSU sub-menu and its options are described in this chapter.
System Options menu
The System Options menu enables basic I/O server configuration with the following options:
• “Embedded Serial Port A” (page 145)
• “Embedded Serial Port B” (page 146)
• “Virtual Serial Port” (page 147)
• “Optional LPT Mode Support” (page 147)
• “Optional LPT Mode Support” (page 147)
• “Integrated Diskette Controller” (page 147)
• “NUMLOCK Power-On State” (page 147)
• “Embedded NICs” (page 148)
• “Diskette Write Control” (page 148)
• “Diskette Boot Control” (page 148)
• “Advanced Memory Protection” (page 149)
144 RBSU menu-driven interface (G6 and earlier servers)