Embedded NICs
These boot options enable or disable network boot for embedded NICs. These settings provide no
functionality if an embedded NIC is not installed.
NOTE:
• When enabling Network Boot support for an embedded NIC, the NIC will not show up in the
Standard Boot Order (IPL) until the next reboot.
• For Gen8 servers, this option is for the embedded LOM or FlexibleLOM. Not every NIC Port
is bootable on every FlexibleLOM. To determine which ports are bootable, see the NIC user
documentation.
• Not every NIC Port is bootable on every FlexibleLOM. Because of this, the RBSU menu may
offer a network boot option that does nothing. To determine which ports are bootable, see
the NIC user documentation.
• The display differs slightly, based on the number of embedded NICs.
After pressing any key to clear the note, the displayed options include:
• Network Boot
• Disabled
System Options menu 15
To Next Page
Loading...
