Automatic Power-On (Gen8 servers)
This feature determines the power state to achieve when power returns to a system that had
experienced an unexpected power outage. Options include:
• Always Power On—The system returns to the On state when AC power is restored, even if
the system had been in the Off state when power was lost.
• Always Remain Off—The system returns to the Off state when AC power is restored, even if
the system had been in the On state when power was lost.
• Restore Last Power State—The system returns to the previous power state (On or Off) when
AC power is restored.
NOTE: Available options and default values vary depending on server model.
78 RBSU menu-driven interface (G7 and later servers)
To Next Page
Loading...
