HP ProLiant DL360e - Advanced Power Management Options

Advanced Power Management Options
Depending on your server model, options may include:
• “Intel QPI Link Power Management” (page 45)
• “Intel QPI Link Frequency” (page 46)
• “QPI Bandwidth Optimization (RTID)” (page 47)
• “Minimum Processor Idle Power Core State” (page 48)
• “Minimum Processor Idle Power Core C6 State” (page 49)
• “Minimum Processor Idle Power C1e State” (page 50)
• “Minimum Processor Idle Power Package State” (page 51)
• “Minimum Processor Idle Power State” (page 52)
• “Energy/Performance Bias” (page 53)
• “Maximum Memory Bus Frequency” (page 54)
• “Channel Interleaving” (page 55)
• “Memory Interleaving” (page 56)
• “PCI Express Generation 2.0 Support” (page 57)
• “PCIe Gen 3 Control (For Select Devices)” (page 58)
• “Maximum PCI Express Speed” (page 59)
• “Dynamic Power Savings Mode Response” (page 60)
• “Collaborative Power Control” (page 61)
• “Turbo Boost Optimization” (page 62)
• “DIMM Idle Power Saving Mode” (page 63)
• “DIMM Voltage Preference” (page 64)
• “HyperTransport Frequency” (page 65)
44 RBSU menu-driven interface (G7 and later servers)