Wake-On LAN
The Wake-On LAN option is a toggle setting that enables or disables the Wake-On LAN feature.
When enabled, the server can be powered up remotely using a network controller.
IMPORTANT: When enabling Wake-On LAN, be sure to remove all power cords before adding
or removing any adapters. Some adapters cause the system to power on when they are added or
removed.
After pressing any key to clear the warning, the following options are displayed:
• Enabled
• Disabled
NOTE: The default setting varies, depending on the server model.
74 RBSU menu-driven interface (G7 and later servers)
To Next Page
Loading...
