Server Security menu
The Server Security menu includes options that control access to the server and its utilities:
• “Set Power-On Password” (page 80)
• “Set Admin Password” (page 81)
• “Network Server Mode” (page 82)
• “Intelligent Provisioning (F10 Prompt)” (page 83)
• “Trusted Platform Module” (page 84)
Set Power-On Password
The Set Power-On Password option sets a password that controls access to the server during
power-up. The server cannot be powered up until the correct password is entered. The Set Power-On
Password option uses a simple character string with a maximum of seven characters. To disable
or clear the password, enter the password followed by a / (slash) when prompted to enter the
password.
80 RBSU menu-driven interface (G7 and later servers)
To Next Page
Loading...
