Standard Boot Order (IPL) menu
The Standard Boot Order (IPL) option configures the Initial IPL device and controls the search order
the server uses to look for a bootable device.
NOTE: If you enable or disable a device, restart the server. Changes do not take effect until after
reboot.
The following table describes devices and their default boot order settings.
Default boot order settingDevice
Set the IPL Device Boot Order to 1IPL:1 CD-ROM
Set the IPL Device Boot Order to 2IPL:2 Floppy Drive (A :)
Set the IPL Device Boot Order to 3IPL:3 USB Drive Key (C :)
Set the IPL Device Boot Order to 4IPL:4 Hard Drive C :
Set the IPL Device Boot Order to 5IPL:5 PCI Embedded Adapter Port 1
68 RBSU menu-driven interface (G7 and later servers)
To Next Page
Loading...
