NOTE: On select newer servers, the BIOS Serial Console Port default is Auto instead of Disabled.
During the boot process, the server checks for the presence of a VT100 compatible client running
at 9600 Baud connected to the server and automatically enables the BIOS Serial Console for that
boot if one is found. This eliminates the need to run RBSU with a local keyboard and monitor
attached to enable the BIOS Serial Console feature.
BIOS Serial Console Baud Rate
The BIOS Serial Console Baud Rate option enables baud rate changes.
162 RBSU menu-driven interface (G6 and earlier servers)
To Next Page
Loading...
