HP ProLiant DL360e - Intelligent Provisioning Quick Configs Settings and Corresponding RBSU Settings

Intelligent Provisioning Quick Configs settings and corresponding RBSU
settings
Available for HP ProLiant Gen8 servers, Intelligent Provisioning Quick Configs options provide the
capability to select a basic policy for performance versus power usage, without having to configure
individual settings through RBSU menus.
The following tables show the three IP Quick Configs option settings and the corresponding RBSU
option settings.
Table 1 RBSU settings on Gen8 servers with AMD processors
Intelligent Provisioning Quick Configs settings
Maximum performanceMinimum power usageBalanced power and
performance
nl
RBSU
nl
power management options
Maximum PerformanceMinimum Power UsageBalanced Power and
Performance
“HP Power Profile”
(page 41)
HP Static High Performance
Mode
HP Static Low Power ModeHP Dynamic Power Savings
Mode
“HP Power Regulator”
(page 42)
DisabledEnabledEnabled“Minimum Processor Idle
Power Core C6 State”
(page 49)
DisabledEnabledDisabled“Minimum Processor Idle
Power C1e State” (page 50)
Auto800MHzAuto“Maximum Memory Bus
Frequency” (page 54)
Channel InterleavingNo InterleavingChannel Interleaving“Memory Interleaving”
(page 56)
AutoForce PCI-E Generation 1Auto“PCI Express Generation 2.0
Support” (page 57)
HT Full Performance ModeHT Power Saving ModeHT Full Performance Mode“HyperTransport Frequency”
(page 65)
FastSlowFast“Dynamic Power Savings
Mode Response” (page 60)
Optimized for PerformanceOptimized for PowerOptimized for Performance“DIMM Voltage Preference”
(page 64)
Table 2 RBSU settings on Gen8 servers with Intel processors
Intelligent Provisioning Quick Configs settings
RBSU
nl
power management options
Maximum performanceMinimum power usageBalanced power and
performance
Maximum PerformanceMinimum Power UsageBalanced Power and
Performance
“HP Power Profile”
(page 41)
HP Static High Performance
Mode
HP Static Low Power ModeHP Dynamic Power Savings
Mode
“HP Power Regulator”
(page 42)
DisabledEnabledEnabled“Intel QPI Link Power
Management” (page 45)
No C-statesC6 StateC6 State“Minimum Processor Idle
Power Core State”
(page 48)
Intelligent Provisioning Quick Configs settings and corresponding RBSU settings 193