HP ProLiant DL380 Gen9 Server - Software and Configuration Utilities; Server Management Software

Software and configuration utilities 130
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility Server mode
HP iLO (on page 130)
Online and Offline
Active Health System (on page 131)
Online and Offline
HP RESTful API ("HP RESTful API support for HP iLO" on page 132)
Online and Offline
Integrated Management Log (on page 132)
Online and Offline
Intelligent Provisioning (on page 133)
Offline
HP Insight Diagnostics (on page 134)
Online and Offline
HP Insight Remote Support (on page 133)
Online
HP Insight Online (on page 133)
Online
Erase Utility (on page 134)
Offline
Scripting Toolkit for Windows and Linux (on page 135)
Online
HP Service Pack for ProLiant (on page 135)
Online and Offline
HP Smart Update Manager (on page 135)
Online and Offline
HP UEFI System Utilities (on page 136)
Offline
HP Smart Storage Administrator (on page 139)
Online and Offline
ROMPaq utility (on page 139)
Offline
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
HP iLO
The HP iLO subsystem is a standard component of HP ProLiant servers that simplifies initial server setup,
server health monitoring, power and thermal optimization, and remote server administration. The HP iLO
subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface. This
design makes HP iLO independent of the host server and its operating system.
HP iLO enables and manages the Active Health System (on page 131) and also features Agentless
Management. All key internal subsystems are monitored by HP iLO. If enabled, SNMP alerts are sent directly
by HP iLO regardless of the host operating system or even if no host operating system is installed.
Embedded remote support software is available on HP ProLiant Gen8 and later servers with iLO 4, regardless
of the operating system software and without installing OS agents on the server.