Component identification 22
Item LED Status Definition
Flashing green
The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green
The drive is a member of one or more logical drives and predicts
the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
Hot-plug fans
CAUTION: To avoid damage to server components, fan blanks must be installed in fan bays 1
and 2 in a single-processor configuration.
CAUTION: To avoid damage to the equipment, do not operate the server for extended periods
of time if the server does not have the optimal number of fans installed. Although the server might
boot, HP does not recommend operating the server without the required fans installed and
operating.
Valid fan configurations are listed in the following table.
Configuration Fan bay 1 Fan bay 2 Fan bay 3 Fan bay 4 Fan bay 5 Fan bay 6
1 processor
Fan blank Fan blank Fan Fan Fan Fan
1 processor, 24 SFF or
12 LFF configuration with
high performance fans
Fan Fan Fan Fan Fan Fan
2 processors
Fan Fan Fan Fan Fan Fan
To Next Page
Loading...
