HP ProLiant DL380 Gen9 - Systems Insight Display Leds

Component identification 85
Systems Insight Display LEDs
The Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with
the access panel installed.
Item
Description
Status
1
Power supplies
Off = Normal
Solid amber = Power subsystem
degraded, power supply failure, or input
power lost.
2
NIC link/activity
Off = No link to network. If the power is off,
view the rear panel RJ-45 LEDs for status
("Rear panel LEDs" on page 87).
Flashing green = Network link and activity
Solid green = Network link
3
Over temp
Off = Normal
Solid amber = High system temperature
detected
4
AMP status
Off = AMP modes disabled
Solid green = AMP mode enabled
Solid amber = Failover
Flashing amber = Invalid configuration
5
Power cap
Off = System is in standby, or no cap is
set.
Solid green = Power cap applied
—
All other LEDs
Off = Normal
Amber = Failure
For more information on the activation of
these LEDs, see "Systems Insight Display
LED combinations (on page 86)."