M
Michelle SmithAug 21, 2025
How to fix 207-Memory Configuration Warning on HP Server?
- MMark WebbAug 21, 2025
To resolve the 207-Memory Configuration Warning on your HP Server, install DIMMs that have a primary width of x4.
To Next PageTo Next Page
How to fix 207-Memory Configuration Warning on HP Server?
To resolve the 207-Memory Configuration Warning on your HP Server, install DIMMs that have a primary width of x4.
How do I resolve the 209-Online Spare Memory Configuration error on my HP ProLiant DL380?
To resolve the 209-Online Spare Memory Configuration error on your HP Server, install or reinstall DIMMs to support online spare configuration.
What to do if a mixture of front side bus speed processors is detected on my HP Server?
To resolve the issue of mixed front side bus speed processors on your HP Server, install processors with the same front side bus speed.
How to fix HP ProLiant DL380 that does not boot a previously installed operating system?
If your HP Server does not boot a previously installed operating system, it could be due to a corrupted operating system, a hard drive subsystem problem, or an incorrect boot order setting in RBSU. To troubleshoot, check the hard drive subsystem for problems and verify the boot order settings in the RBSU.
Why is the system power LED amber on my HP ProLiant DL380 Server?
If the system power LED is amber on your HP Server, it might indicate that the server isn't getting power, the power supply isn't properly connected, the connector is damaged, or the power supply has failed. Ensure the power cord is connected securely to the power supply, the power supply is undamaged and fully seated, the system power and power supply signal cables are connected to the system board, the CD-ROM drive cables are connected, the power button/LED cable is connected, and all pins on connectors and components are straight.
What does a red internal health LED on an HP ProLiant DL380 indicate?
If the internal health LED is red on your HP Server, it could mean a processor, PPM, power converter module, or primary fan has failed. It could also indicate that Processor 1 or PPM 1 isn't installed, a processor is an unsupported type, processors are mismatched, a DIMM has experienced a multibit error, there's no valid memory, populated banks have unsupported, mismatched, or missing DIMMs, the SCSI cabling or terminator configuration is incorrect, the PCI riser cage is unseated, or an overtemperature condition has occurred. Use amber failure LEDs to identify missing, failed, or improperly installed components, or an overtemperature event.
How to troubleshoot a monitor not displaying information on an HP ProLiant DL380?
If the monitor is not displaying information from your HP Server, ensure the monitor is powered on and the video cable is properly connected. If a video board or RILOE II board is installed, check those connections as well. You can also clear NVRAM in RBSU.
What does an amber external health LED on an HP Server mean?
If the external health LED is amber on your HP Server, it means power supply redundancy is lost due to a power supply failure. Ensure the power supply is undamaged and fully seated, or identify and replace the failed power supply.
What does an amber internal health LED on my HP ProLiant DL380 signify?
If the internal health LED is amber on your HP Server, it could indicate a processor or DIMM is in a pre-failure condition, one memory bank is valid but another is missing a DIMM or has a mismatched/unsupported DIMM, a memory bank has failed and online spare memory has copied information, or a redundant fan has failed. Use amber failure LEDs to identify missing, degraded, failed, or improperly installed components.
What does a red external health LED on an HP ProLiant DL380 Server mean?
If the external health LED is red on your HP Server, it indicates that all installed power supplies have failed, or the system may have experienced a short.
General| Product Line | ProLiant |
|---|---|
| Server Type | Rack Server |
| Rack Height | 2U |
| Processor Type | Intel Xeon Scalable |
| Memory Type | DDR4 |
| Storage Options | SAS, SATA, SSD |
| Storage Controller Type | HPE Smart Array controllers |
| RAID Options | RAID 0, 1, 5, 6, 10, 50, 60 |
| Network Options | Embedded 1GbE or 10GbE |
| Power Supply Options | Redundant power supplies available, various wattage options |
| Management | iLO (Integrated Lights-Out) |
| Expansion Slots | PCIe 3.0 |
| Operating System Support | Windows Server, Linux, VMware |
| Processor Cores | Up to 28 cores per processor |
