3. Click the radio button to select the Trap Source Identifier.
4. Click the drop-down list by each setting to select to enable or disable the setting.
5. If you choose to send an alert, click Send Test Alert.
6. Click Apply.
Management — Insight Management Integration
• HP System Management Homepage (HP SMH) FQDN/IP Address—This value sets the browser
destination of the Insight Agent link on iLO pages. Enter the fully qualified domain name or
IP address of the host server. The protocol (https://) and port number (:2381) are
added automatically to the IP address or DNS name to enable access from iLO. If the URL is
set through another method (for example, CPQLOCFG), click the browser refresh button to
display the updated URL.
• Level of Data Returned—This setting controls the content of an anonymous discovery message
received by iLO. The information returned is used for HP SIM HTTP identification requests. The
following options are available:
◦ Enabled (iLO+Server Association Data) (default)—Enables HP SIM to associate the
management processor with the host server, and provides sufficient data to enable
integration with HP SIM.
◦ Disabled (No Response to Request)—Prevents iLO from responding to HP SIM requests.
To edit the settings on the Insight Management Integration tab:
1. In the iLO Configuration Utility window, click Management. The SNMP Settings tab data
appears.
2. Click the Insight Management Integration tab.
The Insight Management Integration tab data appears.
Using iLO Configuration Utility 57
To Next Page
Loading...
