Specifications 120
Specification Value
Minimum (one drive, power supply,
and processor installed)
12.5 kg (27.56 lbs)
Power supply specifications
Depending on the installed options and/or the regional location where the server was purchased, the server
is configured with one of the following power supplies:
• HP ATX 350-W Power Supply (non-hot-plug) (776442-B21)
• HP ATX 550-W Power Supply (non-hot-plug) (776444-B21)
• HP 750-W Common Slot Gold Hot Plug Power Supply (512327-B21)
This is supported when the two-bay HP RPS Enablement option (PN 784582-B21) is installed.
These are Entry Level Power Supply products for HP ProLiant servers. For more information about the power
supply features, specifications, and compatibility, see the HP website
(http://www.hp.com/go/proliant/powersupply).
CAUTION: Check the system and power supply input ratings before powering up the server.
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, see the HP Power Advisor website (http://www.hp.com/go/hppoweradvisor).
To Next Page
Loading...
