Hardware options installation 80
19. Install the strain relief clip.
20. Route and manage the power cords through strain relief clip.
21. Power up the server (on page 18).
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board.
2. Retaining the recovery key/password (on page 83).
3. Enabling the Trusted Platform Module (on page 83).
To Next Page
Loading...
