Operations 22
7. Power up the server (on page 18).
Remove the PCI air baffle
1. Power down the server (on page 18).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Place the server on its side.
4. Remove the access panel (on page 18).
5. Remove the PCI air baffle.
Install the PCI air baffle
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed.
To Next Page
Loading...
