Diagnostic Tools and Setup Utilities 88
Security menu
The Security menu (Figure 4-18) allows the user to set the administrator password and the power-on
password.
The Administrator Password protection level allows the authorized user to change all settings in the
Setup Utility and configure acc ess for system user s.
If the Administrator Password is set, t he Power-on Password p r ot ection level allows the authorized user
to enable or disable the requirement of entering the Administrator Password when booting the server.
Figure 4-18 Security menu
The server is shipped with no password set. To set the administrator password:
1. In the Security menu, sel ect - Set Admin Password, and then press Enter.
2. In the Enter New Password dialog box, type a new password and then press Enter (the
password may consist of up to six alphanumeric characters (A-Z, a-z, 0-9).
3. Retype the password to verify the first entry, and then press Enter.
4. Press F10 to close the Setup Utility.
5. After setting the password, Setup automaticall y sets the selected password fi el d to Enabled.
The power-on password option (ava ilable only if the Administrator Password is set) is set by se l ecting
Change Power-on Password and selecting enable or disable.
To Next Page
Loading...
