Removal and Replacement Procedures
2-34 HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 6/10/05 4:28 PM
9. Remove the screw on the side (1) and 10 screws on the front (2) securing the hard drive
cage to the chassis with a T-15 Torx screwdriver.
10. Pull the hard drive cage out from the chassis (3).
Figure 2-34: Removing the SATA hot-plug hard drive cage
To replace the SATA hot-plug hard drive cage, reverse steps 2 through 10.
When installing the hard drive cage in the chassis, be sure that the hard drive cage is seated
properly on the supporter.
To Next Page
Loading...
