HP ProLiant ML370 - Page 112

Index
power supplies, hot-plug 2-18
requirements
power supply backplane 2-54
hot-plug procedures 2-11
power supply blank 2-17
local occupational and health safety 2-2
PPMs 2-49
retainer, part number 1-5
processor assembly 2-44
return kit, part number 1-5
rack bezel 2-15
RJ-45 connectors
rack rails 2-16
LEDs 4-5
redundant fan cage 2-25
warning 2-2
SCSI hard drives 2-20
ROM-Based Setup Utility (RBSU) 3-3
slot covers 2-30
ROMPaq disaster recovery, procedure 4-19
replacing
ROMPaq Utility 3-4
access panel 2-14
battery 2-59
S
bezel, front 2-6
SCSI drive cage, with backplane, part number 1-5
CD-ROM drive 2-39
SCSI hard drives
CD-ROM drive cable 2-39
LEDs 4-3
center wall 2-37
removing 2-20
DIMMs 2-53
replacing 2-20
diskette drive 2-43
specifications 5-8
diskette drive cable 2-43
serial number, re-entering 2-60
diskette drive power cable 2-43
server See tower server. See rack server
diskette drive retaining bracket 2-43
server rail-release latches 2-5
diskette drive/CD-ROM power cable 2-55
slot covers 2-30
fans 2-23
slot release levers, PCI-X See PCI-X slot release
levers
feet 2-12
front bezel 2-13
SmartStart 2-1
hard drive blank 2-19
SmartStart Diskette Builder Utility 3-4
hard drive cage 2-28
SmartStart software 3-3
hard drives 2-20
CD 3-3
hot-plug power supplies 2-18
spare parts list and numbers 1-4
media blank 2-21
specifications
memory 2-53
CD-ROM drive 5-6
PCI-X expansion board 2-32
DIMMs 5-4
PCI-X expansion boards 2-32
diskette drive 5-5
PCI-X expansion slot cover 2-30
hot-plug SCSI hard drive 5-8
PCI-X guide clips 2-34
memory 5-4
PCI-X slot release levers 2-33
rack server 5-3
point-to-point SCSI cable 2-28
tower server 5-2
power button/LED assembly 2-41
support diskettes See SmartStart Diskette Builder
Utility
power supplies, hot-plug 2-18
power supply backplane 2-55
Survey Utility 3-3
power supply backplane cable 2-55
switches
power supply blank 2-17
front and rear unit identification 4-6
power supply signal cable 2-55
non-maskable interrupt (NMI) 4-15
PPMs 2-50
system board 4-14
processor air baffle 2-35
symbols on equipment 2-2
processor assembly 2-46
system board
rack rails 2-16
LEDs 4-9
redundant fan cage 2-26
replacing 2-57
SCSI hard drives 2-20
switch 4-14
slot covers 2-30
system board LEDs 4-9
slot release levers, PCI-X 2-33
system board switches 4-14
system board 2-57
system board with processor cage, part numbers 1-5
system components 1-4
System Firmware Update 3-4
Index-6 HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide