HP R3000 User Manual

Installation 27
Rotating the logo badge
Gently pull out the logo badge, rotate it 90 degrees, and then replace it in the bezel.
Attaching the UPS front bezel
Attaching the tower conversion stands
WARNING: To reduce the risk of personal injury or damage to the equipment, the tower
conversion stands must be properly attached when the unit is installed as a tower.

HP R3000 Specifications

General

Model	R3000
Capacity	3000 VA / 2700 W
Rack Size	2U
Frequency	50/60 Hz
Output Voltage	230V
Input Voltage	230V
Battery Type	Sealed Lead Acid (SLA)
Interface	Serial, USB
Output Connections	IEC 320 C13, IEC 320 C19
Transfer Time	4 ms
Efficiency	95%
Operating Temperature	0°C to 40°C
Storage Temperature	-15°C to 45°C
Humidity	5% to 95% non-condensing
Dimensions	432 x 88 x 650 mm