HP R5000 - User Manual

HP UPS R5000
User Guide
Abstract
This document includes installation, configuration, and operation information for the HP UPS R5000. This document is for the
person who installs and
maintains power products. HP assumes you are qualified in the servicing of high-
voltage equipment and trained in recognizing hazards in products
with hazardous energy levels.
Part Number: 637909-003 A
February 2013
Ed
ition: 3

HP R5000 Specifications

General

Brand	HP
Model	R5000
Category	UPS
Language	English

Summary

Overview

UPS R5000 Overview

Provides an overview of the HP UPS R5000 features, capabilities, and benefits.

Important Safety Information

Details critical safety instructions for operating and maintaining the UPS to prevent injury.

Component Identification

UPS Front Panel

UPS Front Panel Controls

UPS Rear Panel

REPO Port

Explains the function and usage of the Remote Emergency Power Off (REPO) port.

Installation and Configuration

Precautions

Lists important safety and handling precautions before installation.

Installing the Mounting Rails

Installing the UPS

Step-by-step guide to physically installing the UPS unit into the rack.

Connecting Battery Leads

Instructions for connecting the UPS battery leads safely.

Configuring a USB to Serial Converter

Connecting the REPO Port

Details on how to connect the REPO port, including safety warnings.

Connecting Network Cable

Connecting UPS to Utility Power

How to connect the UPS to the main power source.

Connecting Devices to UPS

Guidance on connecting equipment to the UPS output receptacles.

Charging UPS Batteries

Information on how to charge the UPS batteries before use.

Starting Power to the Load

Configuring UPS Network Module

Introduction to configuring the UPS Network Module.

Connecting Configuration Cable

Launching Terminal Emulation Program

Accessing Web Interface

Steps to access and log into the UPS Network Module web interface.

Configuring UPS Network Module Settings

Details on configuring settings via the web interface.

Installing the ERM

Steps for installing the Extended Runtime Module (ERM).

Connecting ERM to UPS

Charging ERM Batteries

UPS Operations

Modes of Operation

Describes the different operating modes of the UPS.

Standby Mode

Operate Mode

Auto-Bypass Mode

Transferring UPS Between Modes

Configuring the UPS

Powering Down the UPS

Steps to safely power down the UPS.

Power Management

Power Protector Software

Overview of the HP Power Protector software and its features.

Maintenance

Replacing UPS Network Module

Guide for replacing the hot-swappable Network Module.

Replacing Batteries

Introduction to the process of replacing UPS batteries.

Important Battery Safety Information

Crucial safety warnings related to battery handling.

Battery Care and Storage Guidelines

UPS Battery Replacement Procedure

Step-by-step procedure for replacing UPS batteries.

Replacing the UPS

Instructions for removing and replacing the entire UPS unit.

Replacing the ERM

Steps for removing and replacing the Extended Runtime Module (ERM).

Updating UPS Firmware

Guidance on how to update the UPS firmware.

Troubleshooting

Alarm Troubleshooting

Guide to identifying and resolving UPS alarms.

Silencing Audible Alarm

Battery Connection Condition

Troubleshooting steps for battery connection issues.

Bypass Unavailable

Diagnosing and resolving situations where bypass mode is unavailable.

General Alarm Condition

Steps to take for general alarm conditions.

Input Voltage Out of Range

Troubleshooting steps for out-of-range input voltage.

Insufficient Warning of Low Batteries

Diagnosing issues with low battery warnings.

Internal UPS Fault Condition

Troubleshooting steps for internal UPS faults.

Low Battery Shutdowns

Addressing issues related to low battery shutdowns.

Overload Condition

Troubleshooting steps for overload conditions.

REPO Condition

Diagnosing and resolving REPO related conditions.

Site Wiring Condition

UPS Does Not Provide Expected Backup Time

UPS Does Not Start

UPS Frequently Switches Between Utility and Battery Power

UPS is in Auto-Bypass Mode

UPS is on Battery

UPS is on Bypass

Utility Power Condition

Specifications

UPS Input Specifications

UPS Output Specifications

Battery Specifications

Average Battery Runtime

Electrostatic Discharge

Preventing Electrostatic Discharge

Grounding Methods to Prevent Electrostatic Discharge

Support and Other Resources

Before You Contact HP

HP Contact Information