HP Remote System Controller - Log in with Domain Credentials; Managing User Sessions

■
To add groups allowed to authenticate into the RSC, select the Add Group button, then enter the
distinguished name of the group.
Optionally, if you are targeting a Microsoft Active Directory domain, you can additionally enter the
group’s security identifier (SID) string. In this case, groups fetched through their distinguished names
must also match the SID.
Log in with domain credentials
After the directory-based authentication is enabled and configured, users can log in to the RSC using
one of the following formats of user name.
● Distinguished name (DN) (for example, CN=John Smith,CN=Users,DC=mydomain,DC=com)
● Domain email address (for example, john.smith@mydomain.com)
● Domain\username (for example, mydomain\johnsmith)
Managing user sessions
Follow this procedure to manage user sessions for HP Remote System Controller.
1. To view the current number of active sessions, select the user icon and expand Other active
sessions for this user.
2. To log out from all other sessions, select Log out from all other active sessions.
Log in with domain credentials
13