HP StoreEasy 1000

Interfaces
Click Interfaces to view a list of network interfaces available in the system. The interface details
of the selected nodes are displayed.
The Interfaces tab is divided into two panes. The left pane displays a list of all network interfaces
and the right pane displays a summary of the interface selected in the left pane. To view the
IPV4 settings, click Summary and then click IPV4. The following table describes the fields that
are available on this screen:
DescriptionField
Icons that represent the state of an individual interface.State
Name assigned to the interface.Name
Operational state of the network interface:Status
• Disconnected
• UP
• Degraded
• Disabled
Primary IP address of the network interface. If the interface
is in a team, Teamed is displayed.
Primary IP
Local name of the system.System
Alert message about the network interface. If no alert is
applicable, an appropriate message is displayed.
Alerts
Horizontal graph for the network bandwidth utilization
percentage.
Utilization
Displays the following network interface properties:Properties
• Interface description
• Network category
• Speed
• Connectivity
• Connection DNS name
• Team
• VLAN
If you select IPV4, the following properties are displayed:
• Primary IP
• Network mask
• Gateway
• Primary DNS
• Secondary DNS
• Tertiary DNS
• Alternate IP address
Teams
Click Teams to view a list of teams available in the system. The team details of the selected
nodes are displayed.
104 Managing HPE StoreEasy 1000 Storage