HP StoreEasy 1000

Figure 6 StoreEasy 1550 Storage front panel and rear panel LEDs and buttons
7
8
9
1
2
3
4
5
6
StatusDescriptionItem
Solid green = NormalPower supply LED1
Off = One or more of the following conditions exist:
• AC power is unavailable
• Power supply failed
• Power supply is in standby mode
• Power supply error
Green = Linked to networkiLO link LED2
Off = No network connection
Green or flashing green = Network activityiLO activity LED3
Off = No network activity
Green or flashing green = Network activityNIC activity LED4
Off = No network activity
Green = Linked to networkNIC link LED5
Off = No network connection
Solid blue = ActivatedUID button/LED6
Flashing blue:
• 1 Hz/cycle per sec = Remote management or firmware
upgrade in progress
• 4 Hz/cycle per sec = iLO manual reboot sequence initiated
• 8 Hz/cycle per sec = iLO manual reboot sequence in progress
Off = Deactivated
Solid green = Link to networkNIC status LED
2
7
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid green = NormalHealth LED
2
8
Flashing green (1 Hz/cycle per sec) = iLO is rebooting.
Hardware components 11