14. Enter the network login credentials for authentication and click OK.
15. Select the system image from the list and click Next.
16. Select the date and time of the system image that you want to restore and click Next.
17. Select Format and repartition disks to delete existing partitions and reformat all disks during
the restore process and click Next. If you do not want to restore certain disks, click Exclude
Disks.
NOTE: If the Format and repartition disks option is unavailable, click Install Drivers to
install the drivers for the disks that you want to restore.
18. Verify the system image details and click Finish to start the recovery process.
19. Click Yes on the confirmation message to proceed with Windows recovery.
IMPORTANT: Do not interrupt the recovery process.
When the system recovery completes, the system reboots. If you had external storage that was
detached as recommended than reattach the storage and reboot the server.
Proceed with reconfiguring the server, following the steps in this administrator guide for configuring
the system.
174 Recovering HPE StoreEasy 1000 Storage
To Next Page
Loading...
